Ropes for scaffolds and traction hoists

Ropes for scaffolds and traction hoists
 Properties & applications:
These ropes are designed specifically for use in mechanical scaffolds and traction hoists. They are manufactured in specific diameters to suit the available types of equipment. These applications use friction drive which exerts very high radial pressure on the ropes. We manufacture these ropes according to very demanding specifications to ensure their performance.
 
These ropes are lubricated during stranding with a special lubricant suitable for friction drive applications.
They are manufactured in a few different constructions. The "traditional" construction is 6x19 S - IWRC which is still quite common although it was largely replaced by ropes with 4 or 5 strands and a synthetic fiber core.
 
Constructions: 6x19 S Six strands, each in Seale construction 1-9-9. Made only with IWRC
  4x26 WS Four strands, each in Warrington-Seale construction 1-5-5+5-10.
  5x26 WS Five strands, each in Warrington-Seale construction 1-5-5+5-10.
  5xK26 WS Five MasterForm compacted strands, each in Warrington-Seale construction 1-5-5+5-10.
  4x36 WS Four strands, each in Warrington-Seale construction 1-7-7+7-14.
 Core:  IWRC  Independent Wire Rope Core. Only for the 6x19 Seale construction
   SFC  Synthetic fiber core.
Finish: B Zinc coated, Quality B
Grade: 1960 1960 N/mm2 (EIPS)
  2160 2160 N/mm2 (EIPS)
Lay: sZ Right ordinary lay (Right regular lay)
Diameter Range:   See catalog page
 Catalog page